zeiss|SKU:LOW

Zeiss 34mm Ultralight 1913 Mil-Spec Rings — Zero-Securing Mount with Integrated Level

Zero Retention That Survives the Pack-In

Integral recoil lug — Secures zero under heavy recoil
4.41 oz total weight — Ultralight for backcountry pack-ins
LOW 1.0-inch profile — Proper cheek weld on 34mm tubes
Bubble level included — Visible from shooting position
Non-marring edges — Micro-radiused to protect scope tube
  • Free shipping -- Fully insured — signature required on all optics orders
  • Free pre-purchase consult -- Ring height, mount pairing, and setup guidance from a technical expert
  • Authorized dealer warranty -- Full Zeiss manufacturer warranty — no gray market risk

$0.00

Out of stock

In the box

  • Zeiss 34mm Ultralight 1913 Mil-Spec Rings (LOW)
  • Integrated bubble level
  • Type 303 stainless steel top cap screws
Zeiss 34mm Ultralight 1913 MS Rings w/ Level - LOW
Zeiss 34mm Ultralight 1913 Mil-Spec Rings — Zero-Securing Mount with Integrated Level
$0.00

Zero Retention That Survives the Pack-In

Zeiss Ultralight 1913 Mil-Spec Rings deliver precision-built zero retention for the hunter who packs in miles for one ethical shot. The integral bottom recoil lug locks your 34mm scope to the rail under the harshest recoil — after a horse pack, a rocky hike to 11,000 feet, or a rough mountain truck ride. At just 4.41 oz of 7075-T6 aluminum with a 30-micron hard anodized finish, these rugged, trail-ready rings shed weight without sacrificing strength. The integrated bubble level stays visible from your shooting position without breaking your cheek weld — no fumbling when the elk steps into the last minutes of legal light.

FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
7075-T6 Aluminum
Integral Recoil Lug
Integrated Bubble Level
Mil-Spec Hard Anodized
4.41 oz
Total Weight
34mm
Tube Diameter
1.0"
Ring Height (LOW)
Zero That Holds Through the Worst You Can Throw at It

Zero That Holds Through the Worst You Can Throw at It

The integral bottom recoil lug on these Zeiss rings eliminates the zero shift that ruins hunts after a rocky horseback pack-in. This is the exact failure point we test for — Hunt Premium only stocks mounting hardware we would trust with a $3,000 tag in the backcountry. The lug aligns your 34mm scope directly to the rail, so your zero holds through hard recoil, temperature swings, and miles of rough terrain. Combined with Type 303 stainless steel top cap screws and a black oxide finish, these rings are built to keep your glass that holds performing season-after-season.

4.41 Ounces of 7075-T6 Aluminum Built for the Pack-In

4.41 Ounces of 7075-T6 Aluminum Built for the Pack-In

At 4.41 oz, these 7075-T6 aluminum rings cut weight where it matters on a 4-mile pack-in to 11,000 feet. The Mil-Spec Type III, 30-micron hard anodized matte black finish resists the kind of wear that destroys lesser mounts over a single season of backcountry hunting. Low-profile, non-snagging hardware means these rings slide through brush and scree without catching on gear or vegetation. Every machined leading edge is micro-radiused to prevent marring your scope tube — a small detail that protects a significant investment when you are removing and remounting glass between rifles.

Level Your Rifle Without Breaking Your Shooting Position

Level Your Rifle Without Breaking Your Shooting Position

The integrated bubble level is positioned for easy viewing from your shooting position without shifting your head or breaking your cheek weld. On a long-range shot at a bull elk in the last minutes of legal light, you need to confirm your rifle is level without disturbing your setup. The LOW 1.0-inch profile keeps your 34mm scope close to the bore for a consistent, repeatable cheek weld shot after shot. Right- or left-handed shooters can both read the level without adjustment, making these rings a versatile choice for any hunter sharing a rifle or switching between shooting positions in the field.

Compatibility

Verify these three conditions before mounting to ensure a solid, repeatable zero on your rifle.

  • Your scope has a 34mm main tube
  • Your rifle has a 1913 Mil-Spec Picatinny rail
  • LOW (1.0") height provides adequate objective bell available on your barrel contour

Built For

These rings are engineered for hunters who demand zero retention through the worst conditions the mountain can throw at their gear.

Backcountry elk and mule deer hunts where every ounce matters
Long-range precision shooting with dial-up turrets
Lightweight mountain rifle builds under 7 lbs scoped

Full specifications

At a glance

Surface
7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized finish – matte black
Warranty
See product page
Full specifications7 data points across 4 categories

Dimensions

Ring HeightLOW (1.0"/25.4 mm)
Weight4.41 oz

Power & Performance

Tube Diameter34mm
Recoil LugIntegral bottom recoil lug

Materials

Body Material7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized finish – matte black
Top Cap ScrewsType 303 stainless steel – with black oxide finish

Compliance & Warranty

WarrantySee product page

The Hunt Premium Promise

Every product we carry earns its spot through honest evaluation. Here's what you can count on when you order from us.

Authorized DealerFull manufacturer warranty honored on every product — no gray market, no surprises.
Free ShippingShips free, fully insured. Signature required on optics over $500.
30-Day ReturnsUnmounted, in original packaging with caps on — send it back on us if it's not right.
★★★★★
“Mounted these on my 34mm Nightforce before a September elk hunt in Montana. After a 5-mile horseback pack-in, my zero was dead on — no shift at all. The level is easy to read without breaking position, and at 4.41 oz I barely noticed the weight in my pack. These replaced rings that cost twice as much and couldn't hold zero through a single season.”
F
First L.Bozeman, MT

ZEISS Ultralight 1913 Mil-Spec Rings are manufactured to the highest of standards, from premium materials, and with tight tolerances for your long-term safety and field applications. They are designed for optimal long-range shooting solutions and allow for either right- or left-handed operations as well as eye dominance. The bubble level is easily viewed from the shooting position, creating no disturbance in your shooting position. A smarter, sleeker, and ultralightweight ring design for all heavy-duty hunting and shooting applications. 

FEATURES

  • LOW (1.0”/25.4 mm)
  • Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil
  • Compact and refined design, with low-profile, non-snagging hardware 
  • Type 303 stainless steel top cap screws – with black oxide finish
  • Micro-radiused on all machined leading edges to ensure a non-marring design

SPECIFICATIONS

Weight: 4.41 oz

Material Details: 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized finish – matte black

Reviews

There are no reviews yet.

Be the first to review “Zeiss 34mm Ultralight 1913 Mil-Spec Rings — Zero-Securing Mount with Integrated Level”

Your email address will not be published. Required fields are marked *

Frequently Asked Questions

These rings are machined specifically for 34mm scope tubes and mount to standard Picatinny rails. The integral bottom recoil lug engages the rail cross-slot for direct alignment. If your scope is 34mm and your base is Picatinny, these will fit. If you are unsure about ring height compatibility with your objective lens diameter, contact us for a free pre-purchase consult — we will confirm the right fit for your specific rifle and scope combination before you buy.
The integral bottom recoil lug is the critical difference. Standard rings rely on clamping force alone, which can shift under heavy recoil or after rough transport. The lug locks the ring directly into the rail cross-slot, eliminating that shift. Combined with 7075-T6 aluminum construction, Type 303 stainless steel cap screws, and a 30-micron hard anodized finish, these rings are built to hold zero through conditions that cause standard mounts to fail.
Yes. Hunt Premium is an authorized dealer for Zeiss and every brand we carry. Every product ships with the full manufacturer warranty — no gray market, no third-party resale risk. When you buy Zeiss rings from Hunt Premium, you receive genuine Zeiss-backed warranty support. If you ever encounter an issue, we handle it directly through Zeiss, not through a middleman who may or may not honor the claim.
LOW height refers to a 1.0-inch measurement from the base of the ring to the bottom of the scope tube. This profile is designed for 34mm scopes with objective lenses up to approximately 44mm, keeping the scope close to the bore for a consistent cheek weld. If your objective lens is 50mm or larger, you may need a medium or high ring. Reach out and we will confirm the correct height for your specific scope and rifle.
The level is built into the ring body, not glued on as an aftermarket add-on. It is protected by the ring structure and positioned to be readable without protruding where it could catch on gear or take impacts. This is a field-tested design used by long-range hunters who subject their equipment to horseback pack-ins, ATV transport, and rough terrain. It is not a fragile accessory — it is part of the ring itself.
At distances beyond 300 yards, a canted rifle causes significant vertical error — enough to miss or wound an animal. The level lets you confirm your rifle is plumb before taking an ethical shot, especially when shooting from uneven terrain like a hillside or a rock ledge. For hunters who dial elevation at distance, a level is not optional. It is part of a responsible long-range shooting process.
SKU: LOW Categories: , Brand:

The Hunt Premium Promise

Every product we carry earns its spot through honest evaluation. Here's what you can count on when you order from us.

Authorized Dealer Full manufacturer warranty honored on every product — no gray market, no surprises.
Free Shipping Ships free, fully insured. Signature required on optics over $500.
30-Day Returns Unmounted, in original packaging with caps on — send it back on us if it's not right.

Related products

About zeiss Hunting Gear

zeiss is a trusted manufacturer of premium hunting gear. HuntPremium is an authorized dealer offering the full zeiss lineup with free delivery, price match guarantee, and expert support.

View all zeiss products →

Related Categories

Accessories 100 products Bags 62 products Base Layers 49 products Bino Accessories 43 products Binoculars 108 products Bipods & Tripods 36 products
Join the Grill Island Community

Expert Picks, Straight to Your Inbox

No spam. Just the gear worth knowing about.

No spam. Unsubscribe anytime.