These Nightforce Ultralite 1.375 X-High 34mm Ring Set 6 screw A214 rings are strong and very lightweight because of the 7075-T6 hard anodized aluminum bodies and titanium beta crossbolts and jaws.
Nightforce Ultralite 34mm Rings — 7075-T6 Aluminum with Titanium Crossbolts
Zero Retention Built for the Backcountry
- Free Shipping -- Fully insured, signature required on optics over $500
- Free Pre-Purchase Consult -- Technical mount guidance for your rifle and optic
- Authorized Dealer Warranty -- Full Nightforce warranty, no gray market
$0.00
Out of stock
In the box
- Nightforce Ultralite 1.375 X-High 34mm Ring Set
- Mounting screws
Zero Retention Built for the Backcountry
When your scope mount needs to hold zero after a horse pack, a 4-mile hike to 11,000 feet, and a week of temperature swings, the Nightforce Ultralite 1.375 X-High 34mm Ring Set delivers. The 7075-T6 hard anodized aluminum bodies keep weight down, while titanium beta crossbolts and jaws provide the clamping force that serious hunters demand. This precision-built, field-tested ring set is designed for 34mm tubes and uses a 6-screw interface for repeatable, rock-solid mount alignment. If your current rings have ever cost you an opportunity, these earn their spot.
FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
7075-T6 Aluminum
Titanium Beta Hardware
34mm Tube Fit
6-Screw Design
1.375"
X-High ring height
34mm
Tube diameter
6
Screw interface
Zero Retention After Hard Pack-Ins
The scope that loses zero after a rocky horseback ride into elk country is the $2,000 mistake no hunter wants to repeat. These Nightforce Ultralite rings are built to prevent exactly that failure. The 7075-T6 hard anodized aluminum bodies resist deformation under stress, while the titanium beta crossbolts and jaws clamp your 34mm tube with consistent pressure that survives temperature cycling from 20-degree mornings to 70-degree afternoons at altitude. Hunt Premium stocks these rings because we wouldn't bet a $3,000 tag on a mount system that hasn't proven it holds zero through real backcountry transport — horseback, helicopter, or a 4-mile hike on your back.
Maximum Strength Without the Weight Penalty
Backcountry hunters know every ounce matters on a 10-day hunt at 11,000 feet, but cutting weight on your mount system is the wrong place to save. These Nightforce Ultralite rings solve that tension. The 7075-T6 aluminum construction delivers the strength needed to keep your scope tracked through field conditions, while the titanium beta crossbolts and jaws reduce weight compared to all-steel alternatives. The six-screw design distributes clamping force evenly across the 34mm tube, preventing point-of-impact shifts that show up at 300 yards after a hard pack-in. This is field-tested gear that earns its spot season-after-season.
X-High Profile for Large Objective Lenses
The 1.375-inch X-High profile gives you the available needed for 50mm and 56mm objective lenses on flat-top Picatinny rails without shimming or modifying your setup. Proper ring height isn't optional — if your objective bell contacts the barrel, your zero shifts and your hunt is over before it starts. These rings position your scope at the right height for a comfortable cheek weld while maintaining enough space for lens covers and throw levers. The six-screw design clamps securely without crushing the tube, preserving the mechanical zero your rifle build depends on at distance.
Compatibility Check
Confirm these specs match your rifle and scope before ordering.
- 34mm scope tube diameter
- 1.375" mounting height requirement
- Standard Picatinny or Weaver-style base
Where These Rings Earn Their Spot
Built for hunters who pack hard and shoot far.
Backcountry elk hunts with heavy pack loads
High-altitude hunts with extreme temperature shifts
Long-range setups requiring absolute zero retention
Full specifications
At a glance
- Surface
- 7075-T6 hard anodized aluminum
- Warranty
- See product page
Full specifications7 data points across 4 categories
Dimensions
| Height | 1.375" (X-High) |
|---|---|
| Tube Diameter | 34mm |
| Model | A214 |
Power & Performance
| Screw Count | 6 |
|---|
Materials
| Body Material | 7075-T6 hard anodized aluminum |
|---|---|
| Crossbolt & Jaw Material | Titanium beta |
Compliance & Warranty
| Warranty | See product page |
|---|
The Hunt Premium Promise
Every product we carry is vetted for real hunting performance. These rings are no exception.
Authorized DealerFull manufacturer warranty honored on every product — no gray market risk.
Free ShippingFully insured shipping with signature required on all optics orders.
30-Day ReturnsUnmounted, original packaging. If it doesn't fit your build, send it back on us.
★★★★★
“I've run these on my 6.5 PRC for two full seasons — horseback into the Bob Marshall, packed on my back into the Wyoming high country. Zero hasn't moved once. The weight savings over my old steel rings is noticeable on a 10-day pack trip, and the six-screw design just feels more secure. This is the kind of mount hardware you forget about because it does exactly what it's supposed to.”
Frequently Asked Questions
If you've ever had a scope shift zero after a hard pack-in, you already know the answer. These rings use 7075-T6 aluminum and titanium beta crossbolts — materials chosen for strength-to-weight ratio under real field stress, not shelf appeal. The six-screw design distributes clamping force more evenly than four-screw alternatives, reducing the risk of point-of-impact shifts at 300+ yards. For a mount system that protects a $1,500–$3,500 optic on a hunt you've waited years to draw, the cost difference is marginal compared to the consequence of a missed shot from a shifted zero.
Yes. Hunt Premium is an authorized dealer for Nightforce and every brand we carry. That means your Nightforce Ultralite rings ship with full manufacturer warranty support — no gray-market risk, no voided coverage if something goes wrong. When you're investing in mount hardware that protects a premium optic, authorized dealer status isn't a footnote. It's a purchase prerequisite. Buy from an unauthorized seller and you may save a few dollars upfront, but you're gambling with warranty coverage on gear that has to hold up season-after-season in demanding conditions.
These rings are designed specifically for 34mm scope tubes on Picatinny-style rails. The 1.375-inch X-High profile provides available for large objective lenses — typically 50mm and above — on flat-top receivers. If you're running a smaller objective or a different rail system, the height may not be optimal for your setup. We offer free pre-purchase consultations to confirm ring height, base compatibility, and proper alignment for your specific rifle and optic combination. Call us before you order — getting the right fit the first time matters more than getting it fast.
Six screws distribute clamping force across a larger surface area of the 34mm tube compared to four-screw designs. That means more consistent pressure, less risk of distortion under recoil, and better zero retention after hard field use. On a rifle that generates significant recoil or that gets packed in on horseback, the difference between six and four screws shows up as either a scope that holds zero or one that shifts. For backcountry-rated gear, the extra screws aren't overkill — they're the margin between a clean ethical shot and a frustrating miss.
Nightforce Ultralite rings are machined to tight tolerances, and many hunters mount directly without lapping. However, if you want to verify alignment before committing to a final mount, lapping is a reasonable step — especially on a build where you've invested in a premium optic. We recommend torqueing to Nightforce's specified inch-pound values and checking ring alignment before final installation. If you're unsure about the process, our free pre-purchase consult includes mount setup guidance. Getting the install right matters more than rushing it.
The 7075-T6 hard anodized aluminum bodies resist corrosion and handle temperature cycling without losing structural integrity. The titanium beta crossbolts and jaws maintain clamping force through freeze-thaw cycles that would cause inferior materials to contract and loosen. These rings are built for the kind of conditions serious hunters encounter — sub-zero elk mornings in Montana, rain-soaked coastal bear hunts in British Columbia, and week-long temperature swings at altitude. The anodized finish provides additional protection against the elements that wear down lesser mount systems over multiple seasons.
The Hunt Premium Promise
Every product we carry is vetted for real hunting performance. These rings are no exception.
Authorized Dealer
Full manufacturer warranty honored on every product — no gray market risk.
Free Shipping
Fully insured shipping with signature required on all optics orders.
30-Day Returns
Unmounted, original packaging. If it doesn't fit your build, send it back on us.
Related products
-
Original price was: $49.00.$29.40Current price is: $29.40. Get notified This product has multiple variants. The options may be chosen on the product page
-
Hunting Clothing, Hunting Gear, Insulation
$240.00 Get notified This product has multiple variants. The options may be chosen on the product page
About nightforce Hunting Gear
nightforce is a trusted manufacturer of premium hunting gear. HuntPremium is an authorized dealer offering the full nightforce lineup with free delivery, price match guarantee, and expert support.
View all nightforce products →
Reviews
There are no reviews yet.