zeiss|SKU:MEDIUM

Zeiss 36mm Ultralight 1913 MS Rings with Integrated Level — Medium

Zero Retention That Survives the Pack-In

4.41 oz total weight — Shaves ounces on backcountry pack-ins
Integral bottom recoil lug — Locks zero through heavy magnum recoil
Bubble level at your eye — Verify cant without breaking position
Non-marring micro-radiused edges — Protects your scope finish on install
30-micron hard anodized finish — Withstands rock, rain, and season-after-season abuse
  • Free Shipping -- Fully insured — signature required on optics over $500
  • Free Pre-Purchase Consult -- Ring height, base compatibility, and mount pairing
  • Authorized Dealer Warranty -- Full manufacturer warranty — no gray market

$0.00

Out of stock

In the box

  • Zeiss 1913 MS Rings with integrated bubble level (pair)
  • Mounting hardware
Zeiss 36mm Ultralight 1913 MS Rings w/ Level - MEDIUM
Zeiss 36mm Ultralight 1913 MS Rings with Integrated Level — Medium
$0.00

Zero Retention That Survives the Pack-In

These Zeiss Ultralight 1913 Mil-Spec rings are precision-built from 7075-T6 aluminum with a 30-micron hard anodized finish for the kind of abuse a backcountry hunt delivers. The integral bottom recoil lug locks your zero in place after a horse pack, a rocky hike to 11,000 feet, or heavy-recoil calibers. A low-profile bubble level keeps your reticle plumb without shifting your shooting position — critical for long-range shots when the shot window is seconds. At 4.41 oz, this is a rugged, trail-ready mount that earns its spot.

FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
Integral Recoil Lug
7075-T6 Aluminum
Low-Profile Level
Non-Snag Hardware
4.41 oz
Total Weight
36mm
Tube Diameter
1.06"
Ring Height (Medium)
Zero That Survives the Horseback Ride

Zero That Survives the Horseback Ride

The integral bottom recoil lug on these 1913 rings is the reason your zero stays put after a rocky horseback pack-in to 10,000 feet. This is exactly the kind of field-tested detail we evaluate before stocking anything at Hunt Premium — because we don't list gear we wouldn't bet a $3,000 tag on. The lug aligns the rings to your rail and distributes recoil force directly into the base, not the screws. At 4.41 oz in 7075-T6 aluminum with a 30-micron hard anodized finish, these rings are season-after-season rugged without adding weight that costs you on the mountain.

Level Without Leaving Your Shooting Position

Level Without Leaving Your Shooting Position

The integrated bubble level sits where you can see it from behind the rifle — no head lift, no position shift, no lost sight picture. For a hunter taking an ethical shot at 400 yards on a hillside, unnoticed cant is the difference between a clean hit and a miss. These rings solve that with a level that's visible the moment you settle into your scope. The low-profile, non-snagging hardware means nothing catches on your pack or brush during a stalk. Type 303 stainless steel top cap screws with black oxide finish hold everything tight through temperature swings and hard use.

Finish That Holds Up Past Day One

Finish That Holds Up Past Day One

The 30-micron hard anodized matte black finish on 7075-T6 aluminum isn't cosmetic — it's field armor. Micro-radiused leading edges on every machined surface mean these rings won't mar your scope tube during installation, protecting the finish on a $2,500 optic you plan to hunt with for 15 years. The medium height of 1.06 inches gives proper objective bell available on most hunting setups without unnecessary elevation that raises your cheek weld. At 4.41 oz for the pair, these rings add real structural strength without the weight penalty that punishes you on a 4-mile climb with a full pack.

Mount Compatibility

Verify these measurements match your scope tube and rail before ordering.

  • 36mm scope tube diameter
  • Picatinny/1913 spec rail base
  • Medium height: 1.06" from base to tube bottom

Built For

These rings are designed for hunters who demand zero retention in demanding field conditions.

Backcountry elk hunts at altitude
Long-range shots in fading light
Heavy-recoil dangerous game rifles

Full specifications

At a glance

Surface
7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized finish – matte black
Warranty
See product page
Full specifications6 data points across 4 categories

Dimensions

Ring HeightMEDIUM (1.06" / 27mm)
Tube Diameter36mm

Power & Performance

Weight4.41 oz

Materials

Body Material7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized finish – matte black
Screw MaterialType 303 stainless steel top cap screws – with black oxide finish

Compliance & Warranty

WarrantySee product page

The Hunt Premium Promise

Every product we carry is vetted for real hunting performance — not just shelf appeal.

Authorized DealerFull manufacturer warranty honored on every product. No gray market, no exceptions.
Free ShippingFully insured shipping with signature required on all optics orders.
30-Day ReturnsUnmounted, in original packaging with caps on — send it back on us if it's not right.

ZEISS Ultralight 1913 Mil-Spec Rings are manufactured to the highest of standards, from premium materials, and with tight tolerances for your long-term safety and field applications. They are designed for optimal long-range shooting solutions and allow for either right- or left-handed operations as well as eye dominance. The bubble level is easily viewed from the shooting position, creating no disturbance in your shooting position. A smarter, sleeker, and ultralightweight ring design for all heavy-duty hunting and shooting applications. 

FEATURES

  • MEDIUM (1.06″ / 27mm)
  • Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil
  • Compact and refined design, with low-profile, non-snagging hardware 
  • Type 303 stainless steel top cap screws – with black oxide finish
  • Micro-radiused on all machined leading edges to ensure a non-marring design

SPECIFICATIONS

Weight: 4.41 oz

Material Details: 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized finish – matte black

Reviews

There are no reviews yet.

Be the first to review “Zeiss 36mm Ultralight 1913 MS Rings with Integrated Level — Medium”

Your email address will not be published. Required fields are marked *

About zeiss Hunting Gear

zeiss is a trusted manufacturer of premium hunting gear. HuntPremium is an authorized dealer offering the full zeiss lineup with free delivery, price match guarantee, and expert support.

View all zeiss products →

Related Categories

Join the Grill Island Community

Expert Picks, Straight to Your Inbox

No spam. Just the gear worth knowing about.

No spam. Unsubscribe anytime.