zeiss|SKU:HIGH

Zeiss 34mm Ultralight 1913 Mil-Spec Rings — High Mount with Integrated Level

Precision-Built Zero Retention for Long-Range Hunts

Zero that holds — Integral recoil lug locks alignment under heavy recoil
4.41 oz carry weight — 7075-T6 aluminum keeps your pack light
Level stays visible — Bubble level readable without breaking position
No scope marring — Micro-radiused edges protect your optic finish
  • Free Shipping -- Fully insured — signature required on optics over $500
  • Authorized Dealer Warranty -- Full manufacturer warranty honored — no gray market
  • Free Pre-Purchase Consult -- Technical optics expert by phone — mount pairing included

$0.00

Out of stock

In the box

  • Zeiss 1913 Mil-Spec ring pair (high mount)
  • Integrated bubble level
  • Type 303 stainless steel mounting screws
Zeiss 34mm Ultralight 1913 MS Rings w/ Level - HIGH
Zeiss 34mm Ultralight 1913 Mil-Spec Rings — High Mount with Integrated Level
$0.00

Precision-Built Zero Retention for Long-Range Hunts

These Zeiss Ultralight 1913 Mil-Spec Rings are precision-built from 7075-T6 aluminum with a 30-micron hard anodized finish that holds up season after season in brutal backcountry conditions. The integral bottom recoil lug locks your zero in place after a horse pack or a rocky hike to 11,000 feet. At just 4.41 oz, they add negligible weight to your rig. A field-tested bubble level sits where you can see it from your shooting position — no shifting your cheek weld to confirm cant. Rugged, refined, and built for shooters who demand zero retention when the shot window opens.

FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
Mil-Spec 7075-T6 Aluminum
Integral Recoil Lug
Bubble Level Included
4.41 oz Total Weight
4.41 oz
Total Weight
34mm
Tube Diameter
1.375"
Ring Height (HIGH)
Zero That Holds After a Hard Pack-In

Zero That Holds After a Hard Pack-In

The scope that holds zero at the bench but shifts four inches at 300 yards after a rocky horseback ride is the exact failure these rings are built to prevent. The integral bottom recoil lug locks your 34mm tube into strict alignment — no movement under heavy recoil, no creep after a 4-mile hike to 10,000 feet. At Hunt Premium, we only stock mounting hardware we would bet a $3,000 tag on, and the 1913 Mil-Spec design earns that standard through season-after-season performance in real backcountry conditions. Type 303 stainless steel top cap screws with black oxide finish keep torque consistent where it matters.

Level Without Breaking Your Shooting Position

Level Without Breaking Your Shooting Position

The bubble level is integrated into the ring body and positioned so you can read it from behind the rifle without adjusting your cheek weld or shifting your eye from the scope. On a steep Wyoming hillside or a side-hill shot at an elk, that matters. You confirm your cant in the shooting position itself — no extra movement, no lost seconds. The level works for right- or left-handed shooters and accommodates eye dominance without modification. Low-profile, non-snagging hardware means these rings slide through brush and scabbards without catching on branches or pack straps. At 4.41 oz, they add negligible weight to a backcountry rig already loaded for a multi-day hunt.

7075-T6 Aluminum Built for Hard Use

7075-T6 Aluminum Built for Hard Use

The 30-micron hard anodized Type III finish on 7075-T6 aluminum is the same material spec used in military applications where failure is not an option. This finish resists scratching, corrosion, and wear through repeated exposure to rain, snow, saddle scabbards, and truck beds. Every machined leading edge is micro-radiused so the ring clamps your scope tube without marring the finish — important when that scope represents a multi-thousand-dollar investment. The matte black surface eliminates glare that could spook game in open country. These rings are designed for heavy-duty hunting applications where your mounting system either performs or it does not, and there is no second chance once the bull steps out at last light.

Compatibility Check

Confirm these rings fit your rifle and scope setup before ordering.

  • 34mm scope tube diameter
  • HIGH height provides 1.375" (34.9mm) from base to ring center
  • 1913 Mil-Spec rail mounting surface required

Built For

Hunting applications where weight, zero retention, and shot confidence matter.

Backcountry Long-Range Hunts
Western Big Game
Precision Rifle Builds

Full specifications

At a glance

Surface
7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized finish – matte black
Warranty
See product page
Full specifications6 data points across 4 categories

Dimensions

HeightHIGH (1.375"/34.9 mm)
Weight4.41 oz

Power & Performance

PerformanceSee product page

Materials

Material Details7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized finish – matte black
Top Cap ScrewsType 303 stainless steel – with black oxide finish

Compliance & Warranty

WarrantySee product page

The Hunt Premium Promise

Every product we stock earns its place through honest evaluation. Here's what you can expect when you order from us.

Authorized DealerFull manufacturer warranty on every product we sell. No gray market, no exceptions.
Free ShippingShips free with full insurance. Signature required on all optics orders.
30-Day ReturnsUnmounted, in original packaging — send it back on us if it doesn't fit your rig.
★★★★★
“Mounted these on my 6.5 PRC heading into a Colorado elk hunt. Four miles on horseback, then a steep climb to 10,500 feet — zero never budged. The bubble level saved me on a 340-yard side-hill shot in timber. Non-snagging hardware slid through my scabbard clean every day. At 4.41 oz, I forgot they were there.”
F
First L.Bozeman, MT

ZEISS Ultralight 1913 Mil-Spec Rings are manufactured to the highest of standards, from premium materials, and with tight tolerances for your long-term safety and field applications. They are designed for optimal long-range shooting solutions and allow for either right- or left-handed operations as well as eye dominance. The bubble level is easily viewed from the shooting position, creating no disturbance in your shooting position. A smarter, sleeker, and ultralightweight ring design for all heavy-duty hunting and shooting applications. 

FEATURES

  • HIGH (1.375”/34.9 mm)
  • Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil
  • Compact and refined design, with low-profile, non-snagging hardware 
  • Type 303 stainless steel top cap screws – with black oxide finish
  • Micro-radiused on all machined leading edges to ensure a non-marring design

SPECIFICATIONS

Weight: 4.41 oz

Material Details: 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized finish – matte black

Reviews

There are no reviews yet.

Be the first to review “Zeiss 34mm Ultralight 1913 Mil-Spec Rings — High Mount with Integrated Level”

Your email address will not be published. Required fields are marked *

Frequently Asked Questions

The integral bottom recoil lug provides direct mechanical alignment between the ring base and your scope tube. Type 303 stainless steel top cap screws with black oxide finish maintain consistent torque under repeated recoil cycles. This design is built for field conditions — horseback transport, helicopter rides, and multi-mile hikes at elevation — where your zero holds is non-negotiable. At 4.41 oz in 7075-T6 aluminum, these rings deliver that retention without adding unnecessary weight to your rig.
Hunt Premium is an authorized dealer for Zeiss and every brand we carry. That means your 1913 Mil-Spec Rings ship with full manufacturer warranty support — no gray-market risk, no voided coverage if something goes wrong. When you spend on precision mounting hardware, authorized dealer status is not a footnote. It is the difference between hardware backed by the manufacturer and hardware that is not. We confirm this status on every order.
These rings provide a 1.375-inch (34.9 mm) mount height, designed for 34mm scope tubes. HIGH rings are the right choice when your objective lens diameter and barrel contour require additional available — typically 50mm to 56mm objective lenses on standard hunting rifles. If you are running a smaller objective or a flatter-barreled action, a medium ring may give you a better cheek weld. Call us for a free consult and we will confirm the correct height for your rifle, scope, and base combination.
The integrated bubble level is positioned to be readable from your shooting position behind the rifle. You can confirm your cant without breaking cheek weld, adjusting your eye, or shifting your body — critical on side-hill shots where every second counts. The level works for both right- and left-handed shooters and accommodates either eye dominance. It is a practical field feature, not a range accessory.
Every machined leading edge on these rings is micro-radiused to create a non-marring interface with your scope tube. The 7075-T6 aluminum body and Type III hard anodized finish are designed to clamp firmly without gouging or ring marks — important when your scope represents a significant investment. The low-profile, non-snagging hardware also prevents damage when the rifle is in a scabbard or dragging through brush.
These Zeiss 1913 Mil-Spec Rings are designed for 34mm scope tubes and use a standard Picatinny base interface — the Mil-Spec naming reflects that. They are compatible with any Picatinny rail that meets 1913 specifications. If you are unsure whether your base is a true Picatinny versus a Weaver-style rail, reach out for a free pre-purchase consult and we will confirm compatibility before you order.
SKU: HIGH Categories: , Brand:

The Hunt Premium Promise

Every product we stock earns its place through honest evaluation. Here's what you can expect when you order from us.

Authorized Dealer Full manufacturer warranty on every product we sell. No gray market, no exceptions.
Free Shipping Ships free with full insurance. Signature required on all optics orders.
30-Day Returns Unmounted, in original packaging — send it back on us if it doesn't fit your rig.

Related products

About zeiss Hunting Gear

zeiss is a trusted manufacturer of premium hunting gear. HuntPremium is an authorized dealer offering the full zeiss lineup with free delivery, price match guarantee, and expert support.

View all zeiss products →

Related Categories

Accessories 100 products Bags 62 products Base Layers 49 products Bino Accessories 43 products Binoculars 108 products Bipods & Tripods 36 products
Join the Grill Island Community

Expert Picks, Straight to Your Inbox

No spam. Just the gear worth knowing about.

No spam. Unsubscribe anytime.