sirui|SKU:82-TY-70A

SIRUI TY-70A Quick Release Plate — Anti-Twist Arca Swiss Mount

Secure Your Glass on Any Arca Swiss Head

No twist, no slip — Video pin locks your glass in place
Arca Swiss compatible — Works with standard quick release tripod heads
Dual thread options — 1/4 and 3/8 inch screws included
Lightweight aluminium build — 54g plate adds nothing to your pack weight
  • Free Shipping -- Fully insured shipping — signature required on optics
  • Free Pre-Purchase Consult -- Talk to a technical optics expert — reticle selection, zero stop setup, mount pairing
  • Authorized Dealer Warranty -- Full manufacturer warranty honored — no gray market

$0.00

Out of stock

In the box

  • 1x SIRUI TY-70A quick release plate
TY-70A Quick Release Plate
SIRUI TY-70A Quick Release Plate — Anti-Twist Arca Swiss Mount
$0.00

Secure Your Glass on Any Arca Swiss Head

The SIRUI TY-70A quick release plate gives you a precision-built mounting point for your Arca Swiss-compatible tripod head. Machined from aluminium with a rubberized surface and integrated video pin, it prevents camera twist during setup — a detail that matters when you're working fast in fading light. The dual 1/4 inch and 3/8 inch threaded screws handle virtually any camera or optic mounting foot. At just 54g, this rugged plate adds negligible weight while keeping your setup locked down on season-proven hunts where every second counts.

FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
Arca Swiss Compatible
Dual Thread Screws
Video Pin Anti-Twist
Rubberized Surface
39×70mm
Support Dimensions
10,8mm
Plate Height
54g
Weight
A plate that holds when you're handing off glass at first light

A plate that holds when you're handing off glass at first light

A quick release plate that slips mid-glass is the kind of small failure that costs big. You've spent twenty minutes glassing a burn, finally picked out the bedded bull at 800 yards, and when you try to hand your spotting scope to your partner, the plate twists on the clamp. Now you're re-locating the animal in fading light. The SIRUI TY-70A eliminates that with an integrated video pin and rubberized surface that locks the plate against rotation. At Hunt Premium, every component we stock — plates included — has to hold up under real field use. We don't add a part to the catalog unless it performs when the shot window is closing.

Precision-built to drop into your existing Arca Swiss setup

Precision-built to drop into your existing Arca Swiss setup

Arca Swiss compatibility means this precision-built plate drops into any standard quick release system — your existing tripod head, your spotting scope adapter, your bino mount. No adapters, no workarounds. The 39x70mm footprint and 10.8mm profile keep the plate low and out of the way while still providing enough surface area for a secure grip on your optic or camera. The dual-thread design with both 1/4 inch and 3/8 inch camera screws — accessible through a removable rubber plug — means you're covered regardless of what you're mounting. Swappable without tools in the field.

54 grams of aluminium that handles real temperature swings

54 grams of aluminium that handles real temperature swings

At 54 grams, this aluminium plate adds essentially nothing to your pack weight. But that light build doesn't mean corners cut — the machined aluminium body handles temperature cycling from August antelope sun to November elk cold without warping or loosening. The rubberized support surface grips your optic base to prevent micro-shifts that throw off your glassing position after hiking between ridges. For a component this small, the engineering details matter: removable screws via rubber plug, video pin integration, and a profile that fits the SIRUI VA-5 video head out of the box. Season-proven reliability in a part most hunters don't think about until it fails.

Compatibility Check

Confirm your setup matches these requirements before ordering.

  • Uses Arca Swiss quick release system
  • Requires 1/4 inch or 3/8 inch camera thread
  • Support base no larger than 39x70mm

Built For

Reliable mounting for hunters who run tripods in the field.

Spotting scope tripod setups
Video head mounting on VA-5
Backcountry glassing sessions

Full specifications

At a glance

Dimensions
39x70mm
Surface
Aluminium
Warranty
See product page
Full specifications7 data points across 4 categories

Dimensions

Support dimensions39x70mm
Height10,8mm

Power & Performance

Camera screw1/4 inch and 3/8 inch thread

Materials

MaterialAluminium
Weight54g

Compliance & Warranty

CompatibilityArca Swiss quick release system
WarrantySee product page

The Hunt Premium Promise

Every product we carry earns its spot — or it doesn't make the cut.

Authorized DealerFull manufacturer warranty honored on every product. No gray market, no exceptions.
Free ShippingShips free, fully insured. Signature required on optics orders over $500.
30-Day ReturnsUnmounted, original packaging, caps on — send it back on us if it's not right.
★★★★★
“I picked up a spare TY-70A for my bino adapter after three seasons on the original. The video pin seats solidly and the rubberized surface holds without any rotation when I'm passing the glassing setup to my partner. Swapped screws through the rubber plug at the truck in about thirty seconds. Small part, but when you're glassing elk at first light and need to hand off without losing your glassing point, a plate that holds matters.”
D
Dale L.Bozeman, MT

TY-70A Quick Release Plate from SIRUI has a 1/4 inch as well as a 3/8 inch threaded screw, a rubberized surface as well as a video pin. The screws can be removed as needed via a rubber plug. 

The SIRUI quick release plate is compatible with the Arca Swiss quick release system. It also comes standard with the SIRUI VA-5 video head.

– Material: Aluminium
– Support dimensions: 39x70mm
– Height: 10,8mm
– Rubberized support surface
– Video Pin prevents twisting of the (video) camera
– Camera screw: 1/4 inch and 3/8 inch thread
– Arca Swiss compatible
– Weight: 54g

Compatibility
Arca Swiss quick release system

Scope of delivery
1x SIRUI TY-70A quick release plate

Reviews

There are no reviews yet.

Be the first to review “SIRUI TY-70A Quick Release Plate — Anti-Twist Arca Swiss Mount”

Your email address will not be published. Required fields are marked *

Frequently Asked Questions

Yes. The TY-70A is built to the Arca Swiss quick release standard and fits any compatible clamp — whether that's on your spotting scope tripod head, bino adapter, or camera support. The 39x70mm footprint is a standard size that drops into most Arca-compatible heads without modification. If you're running a SIRUI VA-5 video head, this is the factory-standard plate that ships with it. For other heads, verify your clamp's maximum plate width accepts 70mm.
The TY-70A includes both a 1/4 inch and a 3/8 inch threaded screw to accommodate different mounting points. Most spotting scopes and binocular adapters use the 1/4 inch thread, while larger video heads and some camera bodies use the 3/8 inch thread. Both screws are accessible through a rubber plug on the plate surface — swap them in the field without tools depending on what you're mounting.
Two things. First, the rubberized support surface creates friction between the plate and your optic's base, resisting rotation under load. Second, the integrated video pin engages with a corresponding slot on video heads — including the SIRUI VA-5 — to mechanically lock the plate against twisting. For optics without a video pin slot, the rubberized surface alone provides a solid grip that holds through repeated mount-dismount cycles.
Yes. Hunt Premium is an authorized dealer for every brand we carry. When you purchase the TY-70A from us, you receive full manufacturer warranty support — no gray-market risk, no voided coverage. This matters even on smaller components like quick release plates, because authorized dealer status confirms the part meets factory specifications for materials and tolerances. If you have warranty questions, call us.
Yes, as long as both use the Arca Swiss mounting standard. The dual-thread screws let you switch between a 1/4 inch spotting scope base and a 3/8 inch adapter if needed. The 54g weight is negligible regardless of what you mount. Keep in mind you'll need one plate per optic if you're swapping between them on the same tripod head — plates stay attached to the optic, not the head.
You have 30 days from delivery to return the TY-70A in unmounted condition with original packaging. Hunt Premium covers return shipping. Once you've mounted the plate to your optic and used it in the field, it's yours — which is exactly how field-tested gear should work. If you have questions about fitment before buying, call us for a free pre-purchase consult.
SKU: 82-TY-70A Categories: , Brand:

The Hunt Premium Promise

Every product we carry earns its spot — or it doesn't make the cut.

Authorized Dealer Full manufacturer warranty honored on every product. No gray market, no exceptions.
Free Shipping Ships free, fully insured. Signature required on optics orders over $500.
30-Day Returns Unmounted, original packaging, caps on — send it back on us if it's not right.

Related products

About sirui Bipods & Tripods

sirui is a trusted manufacturer of premium bipods & tripods. HuntPremium is an authorized dealer offering the full sirui lineup with free delivery, price match guarantee, and expert support.

View all sirui products →

Related Categories

Accessories 100 products Bags 62 products Base Layers 49 products Bino Accessories 43 products Binoculars 108 products Blinds 12 products
Join the Grill Island Community

Expert Picks, Straight to Your Inbox

No spam. Just the gear worth knowing about.

No spam. Unsubscribe anytime.