Blaser 30mm aluminum scope ring comes with ONLY ONE ring and fits scopes with a tube diameter of 30mm.
SPECS:
Heigh: Low
Scope Tube Size/Mount: 30mm
SKU: 989327NS
Blaser 30mm Aluminum Ring — Low Profile, New Style
Precision-Built Mount for 30mm Scopes
- Free shipping -- Fully insured, signature required on optics orders
- Free pre-purchase consult -- Technical optics expert — mount pairing and fitment
- Authorized dealer warranty -- Genuine Blaser hardware, full manufacturer backing
$0.00
Out of stock
In the box
- 1x Blaser 30mm aluminum ring, low height, new style
Precision-Built Mount for 30mm Scopes
This precision-built Blaser 30mm aluminum ring in the new style provides a rugged, reliable mounting point for your 30mm scope tube. The low profile keeps your optic close to the bore for a consistent cheek weld — critical when you're packing into backcountry country and every ounce of setup reliability matters. Field-tested on hard-hunting rifles, this single ring delivers the zero retention serious hunters demand. Note: this listing includes one ring only.
FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
Aluminum Build
Low Profile
30mm Tube Fit
New Style Design
30mm
Scope Tube Diameter
Low
Ring Height
1
Ring Per Package
Zero That Survives The Pack-In
The scope ring that shifts after a rocky horseback ride is the $2,000 mistake hiding in plain sight. You can run the best glass on the market, but if your mounting hardware moves under field stress, zero retention means nothing. This Blaser 30mm aluminum ring is built to the new style specification with tight tolerances that keep your scope locked in place through temperature cycling, hard impacts, and miles of rough terrain. At Hunt Premium, we don't stock mounting hardware we wouldn't trust on a backcountry elk hunt — because a ring failure at 10,000 feet isn't just inconvenient, it ends your opportunity.
Low Profile For A Consistent Cheek Weld
A high-mounted scope forces you to lift your head off the stock to find the sight picture — and that extra movement is what costs you shots on moving game in heavy timber. This low-height Blaser ring positions your 30mm tube close to the bore, maintaining a natural cheek weld that keeps your eye aligned shot after shot. When you've been glassing for two hours in freezing temps and a bull steps out at 200 yards, you need your reticle exactly where your eye expects it. No searching, no adjusting, no second chances.
New Style Specification For A Clean Match
Mixing old and new style Blaser mounting hardware creates fitment issues that don't show up until you're torquing rings in camp — or worse, after the first shot. This ring follows the current Blaser new style specification, ensuring proper engagement with matching bases. For hunters running Blaser actions, using matched mounting components eliminates variables that could compromise accuracy. It's a small detail that matters in a big way when you're building a system designed to hold zero season after season through the kind of conditions that expose every shortcut in your setup.
Compatibility Check
Confirm your setup matches these specs before ordering.
- 30mm scope tube diameter required
- Low height mount profile selected
- Blaser new style mounting system
Built For
Hunting applications where mount reliability is non-negotiable.
Big Game Hunting
Backcountry Pack-Ins
Precision Rifle Setup
Full specifications
At a glance
- Dimensions
- 30mm
Full specifications4 data points across 4 categories
Dimensions
| Height | Low |
|---|
Power & Performance
| Scope Tube Size/Mount | 30mm |
|---|
Materials
| Construction | Aluminum |
|---|
Compliance & Warranty
| SKU | 989327NS |
|---|
The Hunt Premium Promise
Every product we carry is vetted for real hunting performance.
Authorized DealerFull manufacturer warranty honored on every product — no gray market risk.
Free ShippingFully insured shipping with signature required on all optics orders.
30-Day ReturnsUnmounted, in original packaging — if it doesn't earn its spot, send it back.
★★★★★
“I run Blaser actions on two of my hunting rifles and I've learned the hard way that mismatched rings are a one-way ticket to zero shift. Switched to new style rings across both setups and stopped chasing my zero after every pack-in. Low height gives me a solid cheek weld with my 42mm objective — no lifting, no searching for the sight picture. Simple, solid, exactly what it should be.”
Frequently Asked Questions
This is a single Blaser 30mm aluminum ring in low height, new style specification. Blaser rings are often sold individually to allow hunters to mix heights or replace a damaged ring without buying a full set. Confirm your front and rear ring requirements before ordering — our technical team can help you verify the correct configuration for your specific Blaser setup and scope combination.
This ring is designed for 30mm scope tubes, so it will physically fit any scope with a 30mm main tube. However, the ring's mounting interface is specific to Blaser bases. It will not mount to Picatinny, Weaver, or other rail systems. If you're running a Blaser action with Blaser bases and a 30mm scope, this ring is the correct match. Contact us if you're unsure about your base compatibility.
Blaser updated their mounting hardware specification, and the new style reflects current production tolerances and fitment standards. Mixing old and new style rings on the same rifle can cause uneven clamping pressure or fitment issues. If your existing rings are older style, we recommend replacing both to ensure matched engagement. Our team can help you identify which style your current setup uses.
Hunt Premium is an authorized dealer for the brands we carry. Purchasing through an authorized dealer ensures you receive genuine Blaser mounting hardware with proper fitment specifications — not counterfeit or mismatched components that can compromise your scope mounting system. Every product we ship is sourced through authorized channels with full manufacturer backing.
If you need to replace one damaged ring or want a specific height combination front to rear, buying a single ring saves you from purchasing a full set you don't need. Hunt Premium stocks individual Blaser rings so you can build exactly the configuration your rifle requires — low front, medium rear, or matched pairs — without paying for hardware that stays in your spare parts box.
Low-height rings position the scope close to the barrel, which works well with objective lenses up to approximately 42mm on most Blaser configurations. A 50mm objective may contact the barrel depending on your specific action contour and barrel diameter. For larger objectives, a medium or high ring is typically required. Call our technical team with your scope and rifle details — we'll confirm the correct height before you order.
Mounting hardware can be returned within 30 days unmounted and in original packaging. Once a ring has been torqued to a scope or base, it cannot be returned — this ensures every hunter receives unused, undamaged components with full clamping integrity. If you're unsure about fitment, use our free pre-purchase consult to verify compatibility before mounting anything.
The Hunt Premium Promise
Every product we carry is vetted for real hunting performance.
Authorized Dealer
Full manufacturer warranty honored on every product — no gray market risk.
Free Shipping
Fully insured shipping with signature required on all optics orders.
30-Day Returns
Unmounted, in original packaging — if it doesn't earn its spot, send it back.
Related products
-
Hunting Clothing, Hunting Gear, Insulation
$240.00 Get notified This product has multiple variants. The options may be chosen on the product page -
Original price was: $169.00.$101.40Current price is: $101.40. Get notified This product has multiple variants. The options may be chosen on the product page
About blaser Hunting Gear
blaser is a trusted manufacturer of premium hunting gear. HuntPremium is an authorized dealer offering the full blaser lineup with free delivery, price match guarantee, and expert support.
View all blaser products →
Reviews
There are no reviews yet.