Blaser QD-Mount No Rings. With a QD-Mount, this allows the scope to be detached and/or replaced as often as required without affecting zero. The Saddle Mount also facilitates the exchange of rifle scopes with or without a rail.
SPECS:
SKU: C8800004
Blaser Saddle Mount QD Base — Repeatable Zero on Every Detach
Swap Optics Without Losing Zero
- Free Shipping -- Fully insured — signature required on optics over $500
- Free Pre-Purchase Consult -- Technical optics expert — mount pairing and ring selection
- Authorized Dealer Warranty -- Full manufacturer warranty — no gray market
$0.00
Out of stock
In the box
- Blaser Saddle Mount QD Base (no rings)
Swap Optics Without Losing Zero
The Blaser Saddle Mount QD Base lets you detach and reattach your rifle scope as often as needed without shifting zero — a critical advantage when running different optics on the same rifle across multiple seasons. This precision-built mount works with or without a rail, making it a field-tested foundation for hunters who demand reliable zero retention after hard pack-ins and rough transit in the backcountry.
FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
Quick-Detach Design
Zero Retention
Rings Not Included
Rail or Direct Mount
QD
Mount Type
C8800004
Manufacturer SKU
Base Only
Configuration
Zero that holds through every pack-in
The $2,000 scope that shifts four inches at 300 yards after a rocky horseback ride is the nightmare every serious hunter has lived through. The Blaser Saddle Mount QD Base eliminates that risk at the mounting system level — detach and reattach your scope as often as needed without losing zero. Hunt Premium stocks this mount because it passes the same test we apply to every product: if we wouldn't trust it on a backcountry elk hunt after a four-mile pack-in to 11,000 feet, it doesn't earn a spot in our catalog. This base delivers repeatable zero retention, season after season.
Run multiple optics on one rifle
Some hunts demand a different optic than what you used last season — a higher magnification for open-country mule deer, a lower power for thick timber elk. The Blaser Saddle Mount QD Base facilitates swapping between rifle scopes with or without a rail, so you can match your glass to the hunt rather than committing to one setup year-round. For hunters who run separate optics for different applications, this base removes the compromise. Zero stays consistent between swaps, which means your first shot with a reattached scope hits where your last one did. That consistency is what separates a mount worth running from one that creates problems.
Field-tested mounting integrity
A quick-detach system is only worth running if the detach part doesn't introduce play, wobble, or shift over hard use. The Blaser Saddle Mount QD Base is built to maintain solid contact and alignment through the kind of field conditions that expose weak mounting systems — temperature swings from morning frost to afternoon sun, repeated removals during travel, and the cumulative vibration of miles on horseback. This is a precision-built, field-tested mounting platform designed for hunters who need their scope exactly where they left it, every time. When your shot window is twelve minutes of legal light and a bull at 350 yards, mount integrity is not a detail — it is the foundation of an ethical shot.
Compatibility
Confirm your rifle setup before ordering. This base is designed for specific Blaser actions and requires separate rings.
- Designed for Blaser rifle actions
- Requires separately purchased scope rings
- Accommodates rail and non-rail rifle setups
Built For
This mount serves hunters who need reliable, repeatable optic swaps in the field.
Multi-optic rifle setups
Airline travel with scope removed
Swapping hunting and target scopes
Full specifications
At a glance
- Dimensions
- See product page
Full specifications4 data points across 4 categories
Dimensions
| Base dimensions | See product page |
|---|
Power & Performance
| Mount type | QD Saddle Mount |
|---|
Materials
| Construction | See product page |
|---|
Compliance & Warranty
| SKU | C8800004 |
|---|
The Hunt Premium Promise
Every product we carry is vetted for real-world hunting performance.
Authorized DealerFull manufacturer warranty honored on every product — no gray market risk.
Free ShippingShips free with full insurance and signature required on all optics orders.
30-Day ReturnsReturn unmounted gear in original packaging within 30 days for a full refund.
★★★★★
“I run a 3-15x42 for timber elk and swap to a 5-25x56 for open-country mule deer on the same Blaser. This base returns to zero every time — I've checked it after probably 40 detachments over two seasons. No drift, no play. It just works.”
Frequently Asked Questions
No. The Blaser Saddle Mount QD Base ships as the base only — rings are sold separately. This lets you pair the base with the ring height and style that match your specific scope objective diameter and rifle configuration. If you need help selecting the right rings for your setup, our technical optics team can walk you through reticle height, eye relief, and mount pairing before you order.
The Blaser QD system is engineered to return to the same mounting position each time the scope is reattached. The base and corresponding interface maintain consistent contact points that prevent rotational or axial shift. In practice, this means you can remove your scope for travel, storage, or optic swaps and reattach it without re-zeroing. This is the core advantage of a purpose-built QD mount over generic quick-release options that may introduce play over time.
Hunt Premium is an authorized dealer for every brand we carry. When you purchase the Blaser Saddle Mount QD Base from us, you receive full manufacturer warranty coverage and support. This matters because purchasing mounting hardware from unauthorized third-party sellers or gray-market listings can void warranty protection. We confirm authorized dealer status on every product so you never have to question whether your warranty is valid if something goes wrong.
This Saddle Mount QD Base is designed for Blaser rifle platforms. It facilitates scope exchange with or without a rail. For specific fitment confirmation on your particular Blaser model and barrel profile, contact our technical team before ordering. We provide free pre-purchase consultation to ensure the mount, rings, and scope combination work correctly together — because a mismatch at the mounting system level undermines everything downstream, including zero retention and shot placement.
Hunt Premium offers a 30-day return policy on all products, including mounting hardware. The item must be unmounted, in original packaging, with all caps and components included. Mount it on your rifle after 30 days — or send it back on us. This policy applies to every product we sell, no exceptions.
The Blaser Saddle Mount QD Base itself is compatible with the Blaser mounting interface regardless of tube diameter. However, the rings you pair with this base must match your specific scope tube diameter — typically 30mm or 34mm depending on the optic. Since rings are sold separately, you can run different ring sets for different scopes on the same base, as long as each ring set matches its respective scope.
The Hunt Premium Promise
Every product we carry is vetted for real-world hunting performance.
Authorized Dealer
Full manufacturer warranty honored on every product — no gray market risk.
Free Shipping
Ships free with full insurance and signature required on all optics orders.
30-Day Returns
Return unmounted gear in original packaging within 30 days for a full refund.
Related products
-
Original price was: $49.00.$24.50Current price is: $24.50. Get notified This product has multiple variants. The options may be chosen on the product page
About blaser Hunting Gear
blaser is a trusted manufacturer of premium hunting gear. HuntPremium is an authorized dealer offering the full blaser lineup with free delivery, price match guarantee, and expert support.
View all blaser products →
Reviews
There are no reviews yet.