blaser|SKU:60-SPP05-A-SR

Contessa Picatinny 40mm Quick Release Rings

Quick-Release Mounting That Holds Zero Through Hard Pack-Ins

Quick release lever — Fast optic swaps without tools
Dual bottom lugs — Locks into rail recoil grooves
Flush mount screws — Snag-free, seamless appearance
Picatinny spec machined — Precision fit, no Weaver rails
  • Free Shipping -- Fully insured with signature required
  • Free Pre-Purchase Consult -- Ring height, mount pairing, and setup guidance
  • Authorized Dealer Warranty -- Full manufacturer warranty — no gray market

$0.00

Out of stock

In the box

  • Pair of Picatinny 40mm rings
  • Quick release levers installed
  • Mounting hardware
Picatinny 40 mm (1.1") Rings w/ Quick Release
Contessa Picatinny 40mm Quick Release Rings
$0.00

Quick-Release Mounting That Holds Zero Through Hard Pack-Ins

These precision-built Picatinny 40mm rings feature a quick release lever for fast optic changes in the field. Two integrated bottom lugs lock directly into your rail's recoil grooves — the kind of zero retention that holds after a horseback pack-in or a rocky hike to 11,000 feet. Flush mount screws eliminate snag points, so your setup stays clean when moving through thick timber. Machined to strict Picatinny specifications, these field-tested rings are suited for riflescopes like the Swarovski dS. Note: will not fit Weaver mounts.

FREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORTFREE SHIPPING30-DAY RETURNSEXPERT SUPPORT
Quick Release Lever
Recoil Lug Lockup
Snag-Free Design
Picatinny Spec Machined
40 mm
Ring Diameter
1.1"
Ring Size
2
Integrated Bottom Lugs
Zero Retention Starts at the Mount

Zero Retention Starts at the Mount

The scope that shifts four inches at 300 yards after a horseback pack-in usually isn't a scope problem — it's a mounting problem. Contessa's dual integrated bottom lugs lock directly into your Picatinny rail's recoil grooves, trapping them with no slip under recoil. Hunt Premium doesn't list mounting hardware we wouldn't trust on a backcountry elk hunt. Every ring set in our catalog has been vetted for the same zero retention standard we apply to optics — because the best glass on earth is worthless if the mount lets it walk.

Snag-Free Profile for Real Hunting Conditions

Snag-Free Profile for Real Hunting Conditions

Flush mount screws eliminate exposed fastener heads that catch on pack straps, scabbards, and brush when you're moving through thick timber. On a week-long backcountry hunt, a ring that snags on every alder branch is a ring that loosens over time. Contessa machines these screws flush for a seamless appearance that stays clean and secure from the truck to 11,000 feet. This is field-tested hardware designed for hunters who cover ground — not range shooters who never carry a rifle past the tailgate.

Quick Release When You Need It

Quick Release When You Need It

The quick release lever lets you swap optics without tools — useful when you need to move a scope between rifles or remove it for transport in a tight case. The lever engages the Picatinny rail with repeatable tension, meaning your zero returns when the ring locks back down. Machined specifically to Picatinny dimensions, these rings will not fit Weaver mounts — and that precision fit is what makes the quick release repeatable. This is season-proven hardware for hunters who run one scope across multiple setups and need confidence it returns to zero every time.

Compatibility Guide

These rings are machined to strict Picatinny specifications. Confirm your setup matches the conditions below before ordering.

  • 40mm (1.1") scope tube diameter
  • Picatinny specification rail
  • Weaver mount excluded — will not fit

Built For

Designed for hunters who need rock-solid zero retention and the flexibility to remove their optic without losing their setup.

Backcountry Pack-Ins
Big Game Hunts
Quick Optic Swaps

Full specifications

At a glance

Warranty
See product page
Full specifications6 data points across 4 categories

Dimensions

Ring Diameter40 mm (1.1")

Power & Performance

Mounting StylePicatinny specification
Quick ReleaseYes
Recoil Lug System2 integrated bottom lugs

Materials

ConstructionSee product page

Compliance & Warranty

WarrantySee product page

The Hunt Premium Promise

Every product we carry is vetted for real hunting performance. If it doesn't hold up in the field, it doesn't make the cut.

Authorized DealerFull manufacturer warranty honored on every product. No gray-market risk.
Free ShippingFully insured shipping with signature required on optics .
30-Day ReturnsUnmounted, original packaging, caps on — or send it back on us.

The Contessa set pair of Picatinny 40mm Rail Rings with quick release lever are ideal for mounting riflescopes like the Swarovski dS.

A top quality lightweight ring with two integrated bottom lugs which effectively trap the recoil grooves of your rail. Flush mount screws create a seamless appearance and are snag free. Machined to Picatinny specifications; they will not fit Weaver mounts.

Reviews

There are no reviews yet.

Be the first to review “Contessa Picatinny 40mm Quick Release Rings”

Your email address will not be published. Required fields are marked *

About blaser Hunting Gear

blaser is a trusted manufacturer of premium hunting gear. HuntPremium is an authorized dealer offering the full blaser lineup with free delivery, price match guarantee, and expert support.

View all blaser products →

Related Categories

Join the Grill Island Community

Expert Picks, Straight to Your Inbox

No spam. Just the gear worth knowing about.

No spam. Unsubscribe anytime.